• Usb Mass Storage Controller Driver
• Pci Mass Storage Controller Driver
• Mass Storage Controller Driver For Vista

This package supports the following driver models USB Mass Storage Device from Gateway. Windows NT/2000/XP/2003/2003 AMD 64-bit/XP AMD 64-bit. USB Mass Storage Controller. How to Install a Mass Storage Driver by Andrew Todd Prior to using an external hard drive, USB flash drive or any other type of mass storage device, you will need a driver for the device installed on the computer. Hi: You can use the Vista drivers from your notebook's support page for W7, except the BIOS and firmware files. You need this driver for the mass storage controller (card reader).

Prior to using an external hard drive, USB flash drive or any other type of mass storage device, you will need a driver for the device installed on the computer. A driver is the software that tells the computer and the installed device how to interact. Almost all modern mass storage devices are plug-and-play, meaning that once the device is plugged into the computer, the computer will automatically install its drivers.

Step 1

Plug the mass storage device into the computer using the FireWire cable or USB ports on each device. Once connected, the drive should automatically install. Download any album free mp3. An information balloon will appear above the Task Bar indicating that the drivers are being installed, and one will appear again once the installation is complete.

Step 2

Open the Start Menu and click 'My Computer' or 'Computer,' depending on your version of Windows. If the mass storage device appears in the 'My Computer' or 'Computer' window, then the drivers are correctly installed and the device is ready to use. If the drive does not appear, you must manually install the drivers.

Step 3

Locate the manufacturer and model of the mass storage device. This information will be located on the product packaging or on the information sticker located on the bottom or rear of the device.

Step 4

Go to the manufacturer's website in your Web browser and enter the model number of the device in the product search box. If you are unsure of the website, perform a search in your favorite search engine for the manufacturer's website.

Step 5

Click on the device in the search results and click on the tab for downloads or support.

Step 6

Download the correct drivers for your operating system.

Step 7

Open the Start Menu and right-click on 'My Computer' or 'Computer' and click 'Properties.'

Step 8

Click 'Device Manager' from the top left of the 'Properties' window or from the 'Hardware' tab located at the top.

Step 9

Double-click 'Unknown Devices' in 'Device Manager,' right-click on the mass storage device and click 'Update Driver.'

Step 10

Choose the option to locate the driver and click 'Browse' to open the file browser. Chose the file that was downloaded and click 'Open.'

Follow the installation instructions to complete the installation. Once the installation is complete, the device will be ready to use.

Video of the Day

Usb Mass Storage Controller Driver

Pci Mass Storage Controller Driver

• flash drive image by jimcox40 from Fotolia.com

More Articles

Mass Storage Controller Driver For Vista